remote start not working check engine light on

I would recommend having the computer diagnosed and the Check Engine Light reset after any repairs are completed as needed. This morning went to start car with remote it did not work locked car seemed to operator normal push remote start on fob and lights can on and stayed on with no start of car engaged.

The Check Engine Light Meaning Like New Automotive Repair Engineering Auto Repair

Did remote start as I was walking up to my truck tonight.

. Reasons Your Remote Start is Not Working. You can only start the car starter three time before pcm disables the function must start agin with key to get working. Just go to a stereo shop that installs remote starters and they can bypass your factory remote starter and you will just have to use your new remote starter and it doesnt care if a check engine light is on or not.

Correcting the check engine light and clearing the code will allow the remote starter to operate. The remote start will not work if another system is causing the lock out for the remote start to be active. Reseal the cap restart.

The vehicle cannot be remote started if. Everything runs fine battery is at 13 engine temp is 200-210 tranny temp is 180-190 oil pressure is up to around40-42. This makes the owner aware an issue exists in case the CEL is overlooked and create an inconvenience if ignored.

Are the 2 related. Scan for fault codes and fix accordingly. Then the check engine light can be cancelled with the scanner and I would then expect the remote start to work again.

Thought that was weird got in checked my gas over half full still. My issue was a crank sensor I believe. The ignition is in any mode other than off.

So now that will not work. On the newer GM vehicles that have the remote start function if there is a check engine light related to the emissions system or many other trouble code set in the computer system it will disable the remote start feature. Find More Posts by Drags1998.

These remote start systems are designed not allow starting when there is a code set in the computer and or the check engine light on. I would hit the lock button then the start button twice and then the lights would flash twice. It turns out that I had 2 OBD codes in memory and the check engine light was off.

Up to 25 cash back IF this is Factory Remote Start it will not function IF there is a Trouble Code or any hidden Trouble Codes. Have yet to bring it in to get the code. When the check engine light comes on remote start will not work.

My check engine light is on and My remote start wont. Use of Dealer Scan Tool or equal is needed to Test Program and Update. The car key is.

Dont panic one of the reasons the MIL can illuminate is due to a loose gas cap. Hornet_2497 answered 3 years ago I learned on this forum that the remote start wont work when a check engine light is on. There is an emission control system malfunction and the lamp is on.

Afterwards recheck the remote start for. The hood is not closed. Check engine lights are almost always triggered by loose fuel caps.

Incorrect starting procedure Vehicle not in the Park position Too many remote start attempts Low coolant and oil pressure A hood that has not been properly closed And warning lights that illuminate. May 14 2010 3 M. This might lead to issues with the battery and electrical system if the remote starter was not available.

The remote start wont work with the Check engine light on. The RKE transmitter is inside the vehicle or if the key is in the ignition. Check Engine Light If the Check Engine Light or Malfunction Indicator Lamp MIL is illuminated the remote start system will not work.

Yes the remote start is disabled with a CEL. The situations of a disabled remote start are explained in the owners manual and have been in place since at least 2008 when I had it on my 1st 2000 new vehicle purchase. Up to 8 cash back The codes can be the reason the remote start is not working.

Started fine my son got in and then it shut off. Put key in ignition and car started. If you have any codes in memory or an active light it disables the remote startHope that helps someone.

IF this is NOT Factory Remote Start you will need to find the Manufacturer and Model number. The hazard warning flashers are on. Some Shops can Test for you.

My remote start would not start car. You should carefully consider replacing the alternator and battery if the remote starter did not come with your car. 12 people found this helpful.

Just got back from an oil change on Monday so I checked the level. Why Did My Check Engine Light Come On All Of A Sudden. Started from inside and noticed my check engine light is now on.

Put key in ignition and turn to on position push key fob to onoff positen for about 30 seconds this should reset systemadrian Posted on Jun 27 2010. Also may have diabled car starter by dic comands on radio also if you have engine light on will not operate car starter due to light.

Are You Looking To Reset Subaru Check Engine Light Codes Or Maybe You Want To Also Learn How To Get Check Engine Light Codes Without Coding Dash Lights Scanner